A 3D printer is a powerful machine that allows for rapid realization of designs. Reducing the downtime between prints is essential for use in mass production or when multiple users are using the same printer. Presently, an operator manually removes the print from the machine and starts a new print. In the case of a printer with a removable bed, our system removes prints by lifting the bed from the printer and feeding it through a curved track that causes the bed to bend. This bend breaks the adhesion between the print and the bed, allowing the print to fall off. The system then reverses this process and starts the next print. Upon completion of the print, the printer pauses while the finished print is removed, and begins its next print once the bed is replaced.

• This report represents the work of one or more WPI undergraduate students submitted to the faculty as evidence of completion of a degree requirement. WPI routinely publishes these reports on its website without editorial or peer review.

Creator

• Kacherski, Andrew
• Colucci, Nicholas D.
• Johnson, Alexander
• Mauriello, Dante G.
• Donald, Noah
• Smallcomb, Owen D.

Publisher

• Worcester Polytechnic Institute

Identifier

• E-project-051820-192209

Advisor

• Stabile, Joe
• Radhakrishnan, Pradeep

Year

• 2020

Date created

• 2020-05-18

Resource type

• Major Qualifying Project

Major

• Mechanical Engineering
• Electrical & Computer Engineering
• Interdisciplinary

Rights statement

• In Copyright

Zuletzt geändert

• 2021-01-26