Product Insertion Test Fixture
PúblicoContenido Descargable
open in viewerThe sponsor has a manufacturing process that requires the insertion of a product into a housing slot. This stage of the assembly has been a source of scrap; however, the primary cause is undetermined. This project outlines the design of a testing fixture to simulate the product insertion process and analyze the effects of misalignment on the success of assembly attempts. A linear servo is used to simulate the tooling approach path. A micrometer-driven XY stage is used to induce an adjustable offset between the housing and tooling in the plane perpendicular to the tooling approach. Sensors are used to align the product and housing slot and to measure the geometric characteristics of the product. The nest and tooling are mounted on modular plates to allow various product lines to be tested.
- This report represents the work of one or more WPI undergraduate students submitted to the faculty as evidence of completion of a degree requirement. WPI routinely publishes these reports on its website without editorial or peer review.
- Creator
- Publisher
- Identifier
- E-project-042512-131103
- Advisor
- Year
- 2012
- Center
- Sponsor
- Date created
- 2012-04-25
- Resource type
- Major
- Rights statement
Las relaciones
- En Collection:
Elementos
Elementos
Miniatura | Título | Visibilidad | Embargo Release Date | Acciones |
---|---|---|---|---|
MQPRLN1101.pdf | Público | Descargar |
Permanent link to this page: https://digital.wpi.edu/show/pr76f5108