Compact COMM-NAV Antenna for Handset Application:Designing an Antenna for both Military UHF Communications and GPS Navigation on a Handset
公开可下载的内容
open in viewerIn order to to reduce the amount of equipment a soldier must carry, a combined Communications and Navigation Antenna (COMM-NAV) antenna was proposed as a design objective at the MITRE Cooperation. This study aims to combine a UHF (communications)GPS (navigation) antenna into a single unit. The UHF band of interest was established to be 225MHz to 400MHz, whereas the GPS antenna is required to operate at L1 (1227MHz) and L2 (1575MHz) frequencies. This design is required to minimize interference between the two antennas. Through simulations and measurements, two antennas were designed to meet these requirements. The UHF antenna uses a sleeve monopole design, whereas a stacked, shorted annular ring design was selected to meet the GPS requirements.
- This report represents the work of one or more WPI undergraduate students submitted to the faculty as evidence of completion of a degree requirement. WPI routinely publishes these reports on its website without editorial or peer review.
- Creator
- 贡献者
- Publisher
- Identifier
- E-project-101111-173945
- Advisor
- Year
- 2011
- Center
- Sponsor
- Date created
- 2011-10-11
- Resource type
- Major
- Rights statement
- 最新修改
- 2023-09-19
关系
- 属于 Collection:
项目
单件
缩略图 | 标题 | 公开度 | Embargo Release Date | 行动 |
---|---|---|---|---|
COMM_NAV_Antenna_MQP.pdf | 公开 | 下载 | ||
Project_Proposal.pdf | 公开 | 下载 | ||
Proposal_Cover.pdf | 公开 | 下载 |
Permanent link to this page: https://digital.wpi.edu/show/m613n0234