Studying Polymer Fouling in Biofuel Detoxification Membranes using Quartz Crystal Microbalance with Dissipation Monitoring
PúblicoOne of the hindrances to biofuel plants is fouling of detoxification membranes. This project aimed to develop a protocol for studying the fouling using Quartz Crystal Microbalance with Dissipation Monitoring, and to acquire preliminary data studying the relationship between hydrophobicity and fouling while controlling roughness. Three polymers were studied: polydimethylsiloxane, polyamide, and polyether sulfone using a model cellulose hydrolysate. The polymers acquired between 737 and 2010 ng/cm2 of mass during a 10 hour exposure. Mass accumulated rapidly on the polymer membrane during the initial 30 min of exposure time, followed by a sustained gradual increase. The experimental data showed a potential relationship between hydrophobicity and fouling, though increased data are required.
- This report represents the work of one or more WPI undergraduate students submitted to the faculty as evidence of completion of a degree requirement. WPI routinely publishes these reports on its website without editorial or peer review.
- Creator
- Publisher
- Identifier
- E-project-042915-161447
- Advisor
- Year
- 2015
- Date created
- 2015-04-29
- Resource type
- Major
- Rights statement
Las relaciones
- En Collection:
Elementos
Elementos
Miniatura | Título | Visibilidad | Embargo Release Date | Acciones |
---|---|---|---|---|
|
Polymer_Fouling_in_Biofuels_Report_042915.pdf | Público | Descargar |
Permanent link to this page: https://digital.wpi.edu/show/ks65hd821