Developing a Scalable, Low-Cost Prosthetic Device for Below-Knee Amputations
公开可下载的内容
open in viewerThe goal of this project was to design a low cost and easily reproducible prosthesis that has the ability to mimic a person’s gait cycle. The overall prosthesis design was broken into three components: socket, pylon, and foot. The designs of each component were modeled similarly to pre-existing products, but were made easier to manufacture. 3D printing was the main manufacturing technique for the three components; varying machines and materials were used based on necessary material characteristics. A four-bar linkage system was developed to evaluate the prosthesis’s ability to mimic the locomotion of a person’s gait cycle. Ultimately, parametrized CAD models were developed to allow regeneration of prosthesis based on user measurements.
- This report represents the work of one or more WPI undergraduate students submitted to the faculty as evidence of completion of a degree requirement. WPI routinely publishes these reports on its website without editorial or peer review.
- Creator
- Publisher
- Identifier
- E-project-051820-203350
- Advisor
- Year
- 2020
- Date created
- 2020-05-18
- Resource type
- Major
- Rights statement
- 最新修改
- 2021-01-26
关系
- 属于 Collection:
项目
单件
缩略图 | 标题 | 公开度 | Embargo Release Date | 行动 |
---|---|---|---|---|
Developing_a_Scalable,_Low-Cost_Prosthetic_Device_for_Below-Knee_Amputations.pdf | 公开 | 下载 |
Permanent link to this page: https://digital.wpi.edu/show/bk128d48x