Design of a New Prosthetic Alignment Adaptor with Quantitative Alignment and Height Adjustment
PúblicoAfter an amputation, a patient's prosthesis must be aligned with their body using an alignment adaptor. Current adaptors have two primary limitations: 1) the inability to adjust the vertical height during alignment, and 2) the inability to quantify the adjustments. Therefore, a new prototype adaptor was designed and manufactured that allows for adjustments in all six degrees of freedom, including height. In addition, a novel pin design allows for quantification of the alignment. The prototype was validated with prosthetist feedback and finite element analysis. A protocol for patient testing received IRB approval and is scheduled for the near future. Through a general cost analysis, it was estimated that the benefits of the device would save $25,000 in its ten-year lifetime.
- This report represents the work of one or more WPI undergraduate students submitted to the faculty as evidence of completion of a degree requirement. WPI routinely publishes these reports on its website without editorial or peer review.
- Creator
- Publisher
- Identifier
- E-project-042611-153700
- Advisor
- Year
- 2011
- Date created
- 2011-04-26
- Resource type
- Major
- Rights statement
Relações
- Em Collection:
Itens
Itens
Miniatura | Título | Acesso | Embargo Release Date | Ações |
---|---|---|---|---|
|
Design_of_a_New_Prosthetic_Alignment_Adaptor.pdf | Público | Baixar |
Permanent link to this page: https://digital.wpi.edu/show/9880vs80p