A primary challenge of a flywheel hybrid system is coupling a high speed flywheel to a vehicle's drive train. A unique way of accomplishing this task is using a switch-mode continuously variable transmission (CVT), which is the mechanical analog of a DC-DC power electronics converter. This project conducted a detailed modeling and analysis of the major components of a full size passenger vehicle switch-mode CVT. This model was scaled down to allow for the design and manufacturing of a benchtop prototype. Experimental data taken from the prototype was used to verify proof of concept and quantify the nature and magnitude of system losses. The analysis concluded that the system is feasible but future research is required in the areas of design and manufacturability.

• This report represents the work of one or more WPI undergraduate students submitted to the faculty as evidence of completion of a degree requirement. WPI routinely publishes these reports on its website without editorial or peer review.

Creator

• Morocco, Anthony J
• DeMalia, Michael A.
• Lambusta, Christopher M.
• Araujo, Jeffrey M.

Publisher

• Worcester Polytechnic Institute

Identifier

• E-project-042709-172500

Advisor

• Van de Ven, James D.

Year

• 2009

Sponsor

• SolidWorks Corporation

Date created

• 2009-04-27

Resource type

• Major Qualifying Project

Major

• Mechanical Engineering

Rights statement

• In Copyright

Última modificación

• 2020-12-29