The purpose of this project was to design a DSP based loudspeaker correction processor. To accomplish this task, we measured the frequency response of loudspeakers and used MATLAB to design correction filters that would correct the response within a +/- 1dB tolerance from 200Hz to 20kHz. We then implemented the filters to the DSP evaluation board. Frequency response measurements and blind listening tests were used to judge the effectiveness of our design.

• This report represents the work of one or more WPI undergraduate students submitted to the faculty as evidence of completion of a degree requirement. WPI routinely publishes these reports on its website without editorial or peer review.

Creator

• Huang, Paul C.
• Magnussen, Jon R.
• Lee, Sai Yeung
• Diep, Cuong Chi

Publisher

• Worcester Polytechnic Institute

Identifier

• 01B035M

Advisor

• Nicoletti, Denise W.

Year

• 2002

Date created

• 2002-01-01

Resource type

• Major Qualifying Project

Major

• Electrical Engineering
• Computer Science

Rights statement

• In Copyright