The purpose of this experimental project was to design, construct, and validate a high-resolution apparatus to measure thermal and electrical property changes in heat treatable aluminum alloys. The materials chosen that make up the apparatus were chosen based on properties for a 500 degree change that will isolate the sample material to give a one-directional thermal and electrical flow through the sample material. The goal was to measure the property changes from the development of precipitates forming due to artificial aging. Thermal resistance was measured at four different stages throughout the artificial aging process of wrought Aluminum 6061 and cast Aluminum 319 during a T6 temper. The design aimed to create an apparatus that can swap sample materials with ease.

• This report represents the work of one or more WPI undergraduate students submitted to the faculty as evidence of completion of a degree requirement. WPI routinely publishes these reports on its website without editorial or peer review.

Creator

• Havill, Jeffrey Patrick

Publisher

• Worcester Polytechnic Institute

Identifier

• E-project-080714-144404

Advisor

• Lados, Diana A.
• Iannacchione, Germano S.

Year

• 2014

Date created

• 2014-08-07

Resource type

• Major Qualifying Project

Major

• Mechanical Engineering

Rights statement

• In Copyright