PMMA is burned in a bench scale wind tunnel under steady and oscillating airflows to characterize the downward flame spread response to non-steady airflow conditions. An opposed forced flow configuration is used with 0.5 and 1 mm thick black cast PMMA. The non-steady airflow oscillations for both PMMA thicknesses take the form of a transient sinusoidal profile with three amplitudes (0.1, 0.15 and 0.2 m/s), three frequencies (1/8, 1/16 and 1/32 Hz) and one baseline airflow (0.45 m/s). The time averaged and transient flame spread rate are measured using the change in pyrolysis front over time. The frequency response of the flame behavior, flame length and flame spread rate due to the impact of the non-steady airflow are investigated. A transient gas phase response is seen in all forced flow conditions. The smaller sample thickness displayed a clearer response in the transient flame spread to the non-steady airflow. This behavior is analyzed using physical timescales for solid phase heating.

Creator

• Miska, Alana

Colaboradores

• Rangwala, Ali
• Urban, James
• Thomsen, Maria

Degree

• MS

Unit

• Fire Protection Engineering

Publisher

• Worcester Polytechnic Institute

Identifier

• etd-123738

Palavra-chave

• PMMA
• Downward Flame Spread
• Intermittent Flame Behavior
• Non-steady Airflow

Advisor

• Urban, James

Committee

• Rangwala, Ali
• Thomsen, Maria
• Urban, James

Defense date

• 2024-07-09

Year

• 2024

Date created

• 2024-08-05

Resource type

• Thesis

Source

• etd-123738

Rights statement

• In Copyright

Última modificação

• 2024-08-26