Search Constraints
Filtering by:
Unit
Fire Protection Engineering
Remove constraint Unit: Fire Protection Engineering
1 - 84 of 84
Number of results to display per page
Search Results
Select an image to start the slideshow
Performance-Based Codes: Economics, Documentation, and Design
1 of 84
Risk-Based Fire Research Decision Methodology
2 of 84
A Computer Model of Fire Spread from Engine to Passenger Compartments in Post-Collision Vehicles
3 of 84
Flame Spread on Composite Materials for use in High Speed Craft
4 of 84
Prediction of Fire Growth on Furniture Using CFD
5 of 84
Use of Fire Plume Theory in the Design and Analysis of Fire Detector and Sprinkler Response
6 of 84
Alternate Computer Models of Fire Convection Phenomena for the Harvard Computer Fire Code
7 of 84
Evaluation of New Test Methods for Fire Fighting Clothing
8 of 84
Fire Environments Typical of Navy Ships
9 of 84
Fire Characteristics of Cored Composite Materials for Marine Use
10 of 84
Development of an Improved Fabric Flammability Test
11 of 84
Performance Based Design of Structural Steel for Fire Conditions
12 of 84
Building Performance Evaluation: An Organization for Documentation
13 of 84
Fire-Robust Structural Engineering: A Framework Approach to Structural Design for Fire Conditions
14 of 84
Thermal Decomposition Products Testing With 1,1,1,2,2,4,5,5,5 nonafluoro-4-trifluoromethyl pentan-3-one (C6 F-ketone) During Fire Extinguishing
15 of 84
Fire Scenarios for an Improved Fabric Flammability Test
16 of 84
A Building Evaluation Technique for Fire Department Suppression
17 of 84
CFD Simulation of Soot Formation and Flame Radiation
18 of 84
Model Validation in Fire Protection Engineering
19 of 84
Determination of Failure Criteria for Electric Cables Exposed to Fire for Use in a Nuclear Power Plant Risk Analysis
20 of 84
A Performance Evaluation of Low Pressure Carbon Dioxide Discharge Test
21 of 84
Development of an Instrumented Dynamic Mannequin Test to Rate the Protection Provided by Protective Clothing
22 of 84
Water Spray Suppression and Intensification of High Flash Point Hydrocarbon Pool Fires
23 of 84
Fire Behavior and Fuel Modeling of Flammable Shrub Understories in Northeastern Pine-Oak Forests
24 of 84
Barrier Performance Utilizing Normalized Heat Load as Part of an Engineering Based Building Fire Protection Analysis Method
25 of 84
Smoke Movement Analysis (Smoke Transport Within a Corridor)
26 of 84
The Application of Fire Dynamics to Fire Forensics
27 of 84
Lifesafety Analysis in the Building Firesafety Method
28 of 84
Investigation of Enhanced Soot Deposition on Smoke Alarm Horns
29 of 84
Building Evaluation for Manual Suppression
30 of 84
Dry Chemical Fire Suppression System Discharge Modeling and Testing
31 of 84
Behavior of Wood Exposed to Fire: A Review and Expert Judgement Procedure for Predicting Assembly Failure.
32 of 84
Qualitative Study of the Effect of a Compartment Enclosure on Fire Plume Entrainment
33 of 84
Risk Assessment in Telephone Exchanges
34 of 84
Measuring Speech Intelligibility in Voice Alarm Communication Systems
35 of 84
Material Property Estimation Method Using a Thermoplastic Pyrolysis Model
36 of 84
Radiant Smoldering Ignition of Plywood
37 of 84
Room/Corner Fire Calibration Data: Marine Composite Screening Specimens
38 of 84
A Study of Smoke Aging Examining Changes in Smoke Particulate Size
39 of 84
Theoretical Analysis of Light-Weight Truss Construction in Fire Conditions, Including the Use of Fire-Retardant-Treatment Wood
40 of 84
3D Thermal Mapping of Cone Calorimeter Specimen and Development of a Heat Flux Mapping Procedure Utilizing an Infrared Camera
41 of 84
Bench Scale Apparatus Measurement Uncertainty and Uncertainty Effects on Measurement of Fire Characteristics of Material Systems
42 of 84
A Study on Pulsation In Runehamar Tunnel Fire Tests With Forced Longitudinal Ventilation
43 of 84
Comparisons of Structural Designs in Fire
44 of 84
Hot Surface Ignition Temperature of Dust Layers with and without Combustible Additives
45 of 84
Evaluation of FDS V.4: Upward Flame Spread
46 of 84
FDS Modelling of Hot Smoke Testing, Cinema and Airport Concourse
47 of 84
Flammability Characteristics at Heat Fluxes up to 200 kW/m2 and The Effect of Oxygen on Flame Heat Flux
48 of 84
The Effect of Resin Type and Glass Content on the Fire Engineering Properties of Typical FRP Composites
49 of 84
Development and Validation of a Modified Clean Agent Draining Model for Total Flooding Fire Suppression Systems
50 of 84
The Effect of Sprinkler Sprays on Fire Induced Mass Flow Rates
51 of 84
Characterizing the Flammability of Storage Commodities Using an Experimentally Determined B-number
52 of 84
An investigation into the use of Cross Correlation Velocimetry
53 of 84
Failure Analysis of the World Trade Center 5 Building
54 of 84
Characterizing the Entry Resistance of Smoke Detectors
55 of 84
The Implementation of Residual Risk Analysis for Explosion Protection Systems
56 of 84
Heat and Smoke Transport in a Residential-Scale Live Fire Training Facility: Experiments and Modeling
57 of 84
A Porous Media Model for Sprinkler Wetting
58 of 84
Study of Interaction of Entrained Coal Dust Particles in Lean Methane-Air Premixed Flames
59 of 84
Burning Characteristics of Individual Douglas-Fir Trees in the Wildland/Urban Interface
60 of 84
Factors governing spontaneous ignition of combustible dusts
61 of 84
LES Modeling of Flow through Vegetation with Applications to Wildland Fires
62 of 84
A Study of Spreading and In Situ Burning of Oil in an Ice Channel
63 of 84
Influence of Coal Dust on Premixed Turbulent Methane-Air Flames
64 of 84
An integrated framework for the next generation of Risk-Informed Performance-Based Design approach used in Fire Safety Engineering
65 of 84
CFD Flame Spread Model Validation: Multi-Component Data Set Framework
66 of 84
A Conceptual Framework for Assessing Post-Earthquake Fire Performance of Buildings
67 of 84
An Analysis of Oil Combustion on Snow
68 of 84
Parameter Estimation Methods for Comprehensive Pyrolysis Modeling
69 of 84
Development of a holistic approach to integrate fire safety performance with building design
70 of 84
A Study on Burning of Crude Oil in Ice Cavities
71 of 84
Development and Assessment of a Decision Support Framework for Enhancing the Forensic Analysis and Interpretation of Fire Patterns
72 of 84
Outdoor Gas Emission Sampling System: A Novel Method for Quantification of Fires in Outdoor Conditions
73 of 84
A Decision Support Framework for Assessing the Technical Adequacy of Performance-Based Design Approaches to Fire Safety Engineering
74 of 84

Influence of the Reactant Temperature on Particle Entrained Laminar Methane-Air Premixed Flames
75 of 84
Influence of Dusts on Premixed Methane-Air Flames
76 of 84
Melting of Ice and Formation of Lateral Cavity during In Situ Burning in Ice-Infested Waters
77 of 84
Hazard Assessment of Portable Gasoline Container Flammability
78 of 84
An Introduction to Fire Performance Monitoring for Buildings
79 of 84
Air entrainment into vortex flow in an open top cavity
80 of 84
Influence of Turbulence on Fuel Slick Fires with an Immersed Conductive Object
81 of 84
Pool Fire Burning Facilitated by Subcooled Nucleate Boiling Heat and Mass Transfer Processes
82 of 84
Effect of Inert Gas Discharge Time on Wood Crib Fires in Reduced-Scale and Full-Scale Experiments
83 of 84
Energetics of Lithium-Ion Battery Failure during Use and Thermal Abuse
84 of 84