Search Constraints
Search Results
Select an image to start the slideshow
MICROSTRUCTURAL, CORROSION AND MECHANICAL CHARACTERIZATION OF FRICTION-STIR WELDED JOINTS BETWEEN ALUMINUM AND MAGNESIUM ALLOYS
1 of 49
Design of a Rooftop Photovoltaic Array for the George C. Gordon Library at Worcester Polytechnic Institute: Structural, Thermal, and Performance Analysis
2 of 49
Nitriding - fundamentals, modeling and process optimization
3 of 49
Formation and Distribution of Porosity in Al-Si Welds
4 of 49
Effects of the Edges of 2D Materials on Photoelectrochemical Solar Energy Conversion
5 of 49
Effects of Solution Rheology on Electrospinning of Polystyrene
6 of 49
The Effects of Rust on the Gas Carburization of AISI 8620 Steel
7 of 49
Development of Aluminum Dross-based Material for Engineering Application
8 of 49
The effect of flow rate, spray distance and concentration of polymer quenchant on spray quenching performance of CHTE and IVF probes
9 of 49
Ultrasonic welding of Copper to Laminate Circuit Board
10 of 49
Fundamentals of Mass Transfer in Gas Carburizing
11 of 49
Application of Materials Characterization, Efficacy Testing, and Modelling Methods on Copper Cold Spray Coatings for Optimized Antimicrobial Properties
12 of 49
Metal Recovery via Automated Sortation
13 of 49
Corrosion Behavior of Direct Metal Laser Sintered Ti-6Al-4V for Orthopedic Applications
14 of 49
Processing Routes for Aluminum based Nano-Composites
15 of 49
A Selective Encapsulation Solution For Packaging An Optical Micro Electro Mechanical System
16 of 49
The Effects of Contamination and Cleaning on AISI 9310 Vacuum Carburized Steel
17 of 49
Investigation of the quench and heating rate sensitivities of selected 7000 series aluminum alloys
18 of 49
Advanced Electrolyte System Design of Battery towards Expanded Applications on Energy Storage
19 of 49
Activated atmosphere case hardening of steels
20 of 49
Modeling and Verification of Simulation tools for Carburizing and Carbonitriding
21 of 49
A Comprehensive Feasibility Study on Gas-Atomized Feedstock Generated from Reclaimed Materials for Rapid Repair Applications.
22 of 49
Multiscale Indentation Mechanics for Advanced and Heterogenous Metallurgical Materials Processing-Structure-Properties-Performance Relations
23 of 49
Computational Thermodynamic and Kinetic Modeling and Characterization of Phase Transformations in Rapidly Solidified Aluminum Alloy Powders
24 of 49
Origin Of Growth Twins During Czochralski Growth Of Heavily Doped, Dislocation-Free Single Crystal Silicon
25 of 49
Si/C Nanocomposites for Li-ion Battery Anode
26 of 49
Life Extension of High Temperature Structural Alloys by Surface Engineering in Gas and Vacuum Carburizing Atmospheres
27 of 49
Simulation, optimization and development of thermo-chemical diffusion processes
28 of 49
Hot Tearing in Cast Aluminum Alloys: Measures and Effects of Process Variables
29 of 49
Characterization of the performance of mineral oil based quenchants using CHTE Quench Probe System
30 of 49
Application of Computational Thermodynamic and Solidification Kinetics to Cold Sprayable Powder Alloy Design
31 of 49
Modeling of Heat Treating Processes for Transmission Gears
32 of 49
Understanding the Material Flow Mechanisms, Microstructure Evolution, and Mechanical Properties in Friction Stir Welding of Dissimilar Metal Alloys
33 of 49
Design of Cold Spray Aluminum Alloys for Structural Components, Coatings, and Repairs: Fatigue Mechanisms, Novel Interfacial Evaluations, and Methods for Material/Part Qualification
34 of 49
Design and Qualification of Wrought and Additively Manufactured 4340 Steels for Fatigue-Critical and Damage-Tolerant Applications
35 of 49
Optimization of Coupled Computational Modeling and Experimentation for Metallic Systems: Systematic Microstructural Feature – Mechanical Property Correlation for Cold-Sprayable Powders
36 of 49
The effects of part orientation and fluid flow on heat transfer around a cylinder.
37 of 49
The Effects of Contaminants on the Gas Nitriding of Nitralloy-135
38 of 49
Residual Stress Reduction During Quenching of Wrought 7075 Aluminum Alloy
39 of 49
An integrated systems approach to understanding distortion and residual stress during thermal processing: design for heat treating
40 of 49
A Methodology to Predict the Effects of Quench Rates on Mechanical Properties of Cast Aluminum Alloys
41 of 49
Diffusion and Phase Change During Heat Treatment of Ni-B Coatings on Steel
42 of 49
Quench Probe and Quench Factor Analysis of Aluminum Alloys in Distilled Water
43 of 49
Evolution and Characterization of Partially Stabilized Zirconia (7wt% Y2O3) Thermal Barrier Coatings Deposited by Electron Beam Physical Vapor Deposition
44 of 49
Synthesis, Integration, and Characterization of Functional Inorganic Nanomaterials
45 of 49
Novel Nanostructured Metal Oxides for Efficient Solar Energy Conversion
46 of 49
Tailoring structure and properties of polyelectrolyte-based material via materials selection and post-assembly treatment
47 of 49
Materials Recovery and Upgrade from Spent Lithium-ion Batteries
48 of 49
High Energy Manganese-Based Layered Oxide Cathodes for Lithium-Ion and Sodium-Ion Batteries
49 of 49
