Search Constraints
« Previous |
1 - 20 of 29
|
Next »
Search Results
Select an image to start the slideshow
Study of Hot Tearing in Cast and Wrought Aluminum Alloys
1 of 20
Modeling of an Aerospace Sand Casting Process
2 of 20
The Effects of Fill-Nonuniformities on the Densified States of Cylindrical Green P/M Compacts
3 of 20
Removal of Hydrogen and Solid Particles from Molten Aluminum Alloys in the Rotating Impeller Degasser: Mathematical Models and Computer Simulations
4 of 20
Feasibility Study of Infrared Detection of Defects in Green-State and Sintered PM Compacts
5 of 20
Models for Compaction and Ejection of Powder Metal Parts
6 of 20
Semi-Solid Slurry Formation Via Liquid Metal Mixing
7 of 20
Characterization of the Solidification Behavior and Resultant Microstructures of Magnesium-Aluminum Alloys
8 of 20
De-lubrication during sintering of P/M compacts: Operative mechanism and process control strategy
9 of 20
Optimization of the Heat Treatment of Semi Solid Processed A356 Aluminum Alloy
10 of 20
Study on Genetic Algorithm Improvement and Application
11 of 20
Development of Computer Aided Heat Treatment Planning System for Quenching & Tempering (CHT - q/t) and Industrial Application of CHT-bf & CHT-cf
12 of 20
The Effect of Mechanical Mold Vibration On the Characteristics of Aluminum Alloys
13 of 20
The Continuous Rheoconversion Process: Scale-up and Optimization
14 of 20
Physical and Chemical Mechanisms of Lubricant Removal During Stage I of the Sintering Process
15 of 20
The effect of flow rate, spray distance and concentration of polymer quenchant on spray quenching performance of CHTE and IVF probes
16 of 20
Formation and Distribution of Porosity in Al-Si Welds
17 of 20
Friction Stir Processing of Aluminum Alloys
18 of 20
X-Ray Fluorescence Measurements Of Molten Aluminum Elemental Composition
19 of 20
Processing Routes for Aluminum based Nano-Composites
20 of 20