Search Constraints
Search Results
Select an image to start the slideshow
Aluminum Nano-composites for Elevated Temperature Applications
1 of 29
Removal of Hydrogen and Solid Particles from Molten Aluminum Alloys in the Rotating Impeller Degasser: Mathematical Models and Computer Simulations
2 of 29
Green & Clean Al-Cu Alloys
3 of 29
The Effects of Fill-Nonuniformities on the Densified States of Cylindrical Green P/M Compacts
4 of 29
Development of Computer Aided Heat Treatment Planning System for Quenching & Tempering (CHT - q/t) and Industrial Application of CHT-bf & CHT-cf
5 of 29
Study on Genetic Algorithm Improvement and Application
6 of 29
Modeling of an Aerospace Sand Casting Process
7 of 29
X-Ray Fluorescence Measurements Of Molten Aluminum Elemental Composition
8 of 29
Investigation and Optimization of a Porous Sintered Ceramic Material in a Grinding Application
9 of 29
The Continuous Rheoconversion Process: Scale-up and Optimization
10 of 29
Influence of Mold Coating Wear on Heat Transfer Coefficient in Aluminum Permanent Molds
11 of 29
The Effect of Mechanical Mold Vibration On the Characteristics of Aluminum Alloys
12 of 29
Friction Stir Processing of Aluminum Alloys
13 of 29
Semi-Solid Slurry Formation Via Liquid Metal Mixing
14 of 29
Study of Hot Tearing in Cast and Wrought Aluminum Alloys
15 of 29
Characterization of the Solidification Behavior and Resultant Microstructures of Magnesium-Aluminum Alloys
16 of 29
Processing Routes for Aluminum based Nano-Composites
17 of 29
Development of a Recycling Process for Li-Ion Batteries
18 of 29
Optimization of the Heat Treatment of Semi Solid Processed A356 Aluminum Alloy
19 of 29
The effect of flow rate, spray distance and concentration of polymer quenchant on spray quenching performance of CHTE and IVF probes
20 of 29
Development of Aluminum Dross-based Material for Engineering Application
21 of 29
Models for Compaction and Ejection of Powder Metal Parts
22 of 29
Experimental Testing of a Computer Aided Heat Treatment Planning System
23 of 29
Feasibility Study of Infrared Detection of Defects in Green-State and Sintered PM Compacts
24 of 29
Formation and Distribution of Porosity in Al-Si Welds
25 of 29
Physical and Chemical Mechanisms of Lubricant Removal During Stage I of the Sintering Process
26 of 29
Prediction and Reduction of Die Soldering.
27 of 29
De-lubrication during sintering of P/M compacts: Operative mechanism and process control strategy
28 of 29
The Effects of Processing Residual Stresses on the Fatigue Crack Growth Behavior of Structural Materials
29 of 29