Search Constraints
Search Results
Select an image to start the slideshow
Aluminum Nano-composites for Elevated Temperature Applications
1 of 21
Removal of Hydrogen and Solid Particles from Molten Aluminum Alloys in the Rotating Impeller Degasser: Mathematical Models and Computer Simulations
2 of 21
Green & Clean Al-Cu Alloys
3 of 21
Modeling of an Aerospace Sand Casting Process
4 of 21
X-Ray Fluorescence Measurements Of Molten Aluminum Elemental Composition
5 of 21
Investigation and Optimization of a Porous Sintered Ceramic Material in a Grinding Application
6 of 21
The Continuous Rheoconversion Process: Scale-up and Optimization
7 of 21
Influence of Mold Coating Wear on Heat Transfer Coefficient in Aluminum Permanent Molds
8 of 21
Friction Stir Processing of Aluminum Alloys
9 of 21
Semi-Solid Slurry Formation Via Liquid Metal Mixing
10 of 21
Study of Hot Tearing in Cast and Wrought Aluminum Alloys
11 of 21
Characterization of the Solidification Behavior and Resultant Microstructures of Magnesium-Aluminum Alloys
12 of 21
Processing Routes for Aluminum based Nano-Composites
13 of 21
Development of a Recycling Process for Li-Ion Batteries
14 of 21
Optimization of the Heat Treatment of Semi Solid Processed A356 Aluminum Alloy
15 of 21
The effect of flow rate, spray distance and concentration of polymer quenchant on spray quenching performance of CHTE and IVF probes
16 of 21
Development of Aluminum Dross-based Material for Engineering Application
17 of 21
Formation and Distribution of Porosity in Al-Si Welds
18 of 21
Physical and Chemical Mechanisms of Lubricant Removal During Stage I of the Sintering Process
19 of 21
Prediction and Reduction of Die Soldering.
20 of 21
De-lubrication during sintering of P/M compacts: Operative mechanism and process control strategy
21 of 21